Difference between revisions of "SketchChair Manual"
From SketchChair Wiki
(→Tools) |
(→Tools) |
||
| Line 9: | Line 9: | ||
!|function | !|function | ||
|- | |- | ||
| − | |[[File: Btn_Tools_Draw.png]]||Brush||Produces a single stroke with a offset. | + | |[[File: Btn_Tools_Draw.png]]||'''Brush'''||Produces a single stroke with a offset. |
|- | |- | ||
| − | |[[File: Btn_Tools_Leg.png]]||Leg||Produces a single line that tapers with it's ends always facing the ground. | + | |[[File: Btn_Tools_Leg.png]]||'''Leg'''||Produces a single line that tapers with it's ends always facing the ground. |
|- | |- | ||
| − | |[[File: | + | |[[File: Btn_Tools_Select.png]]||'''Select'''||Selects and edits control points in paths on selected layers. |
|- | |- | ||
| − | |[[File: | + | |[[File:Btn_Tools_DrawPath.png]] || '''Path''' || Used to draw a exact outline using a path. |
|- | |- | ||
| − | |[[File: | + | |[[File: Btn_Tools_OffsetPath.png]]||'''Offset Path'''||Produces a path with a offset. This path can then have beziers added to it or points added or removed. Offset amount is able to be varied at each point. |
|- | |- | ||
| − | |[[File: | + | |[[File: Btn_Tools_Bezier.png]]||'''Bezier Tool'''||Adds and manipulates bezier control points added to a path. |
|- | |- | ||
| − | |[[File: | + | |[[File: Btn_Tools_Measure.png]]||'''Measure'''||Can be used to measure your design. Size is relative to the current selected scale. |
|- | |- | ||
| − | |[[File: | + | |[[File: Btn_Tools_Scale.png]]||'''Scale'''||Used to scale a design. |
|- | |- | ||
| − | + | |[[File: Btn_Tools_Undo.png]]||'''Undo'''||Undo the last edit. | |
| − | + | ||
| − | |[[File: Btn_Tools_Undo.png]]|| | + | |
|- | |- | ||
|} | |} | ||
Revision as of 12:36, 20 March 2013
Contents |
Interface
Tools
| icon | name | function |
|---|---|---|
 |
Brush | Produces a single stroke with a offset. |
 |
Leg | Produces a single line that tapers with it's ends always facing the ground. |
 |
Select | Selects and edits control points in paths on selected layers. |
 |
Path | Used to draw a exact outline using a path. |
 |
Offset Path | Produces a path with a offset. This path can then have beziers added to it or points added or removed. Offset amount is able to be varied at each point. |
 |
Bezier Tool | Adds and manipulates bezier control points added to a path. |
 |
Measure | Can be used to measure your design. Size is relative to the current selected scale. |
 |
Scale | Used to scale a design. |
 |
Undo | Undo the last edit. |
Layers panel
Camera Controls
Make It
Material Settings
Shortcut Keys
Shortcut Keys
| Mac | Pc | Function |
|---|---|---|
| ⌘+S | Ctrl+S | Save |
| ⇧⌘+S | Ctrl+S | Save As |
| ⌘+O⇧ | Ctrl+O | Open |
| ⌘+Z | Ctrl+Z | Undo |
| ⇧⌘+Z | ⇧Ctrl+Z | Redo |
| ⌘+G | Ctrl+S | Physics play/pause |
| ⇧⌘+G | ⇧Ctrl+G | Physics reset |
| ⇧⌘+I | ⇧Ctrl+I | Show/Hide Grid |
| ⌘+E | Ctrl+E | Show/Hide Ergonomic Figure |
| ⌘+F | Ctrl+F | Show/Hide Floor |
| ⌘+M | Ctrl+M | Make it |
| ⌘+B | Ctrl+B | Build it |
