SketchChair Manual
From SketchChair Wiki
Revision as of 22:55, 5 May 2013 by 188.143.234.127 (Talk)
UOWlbF http://www.78NLRvzfIwzacsSvHH4hdZWSkQdHROAk.com
Contents |
Make It Interface
Tools Panel
The Make It screen is for outputting your design for cutting. Here you can set the material size and thickness along with the scale of your design and any other cutting details, for example dog-bones for CNC routing.
 |
Plot Design | Save the pattern to a craft-robo plotting file and then send to the plotter (BROKEN currently not complete) |
 |
Open the pattern in the native printing dialogue. | |
 |
Save to PDF | Save the pattern to a PDF. |
Materials Panel
 |
Bevelled Slots | Add a bevel to the entrance of each slot to help with assembly. |
 |
Add Dog-bones | Add dog-bones to slots. Removes the internal radius on slots left when CNC routing. |
 |
Separate Slots | Separate slot paths from layer and slice paths. |
 |
Autopack Pieces | Autopack pieces on the cutting sheet. This can take a minute or two. |
 |
Add Labels | Add labels to the pattern. |
Shortcut Keys
| Mac | PC | Function |
|---|---|---|
| ⌘+S | Ctrl+S | Save |
| ⇧⌘+S | ⇧Ctrl+S | Save As |
| ⌘+O⇧ | Ctrl+O | Open |
| ⌘+Z | Ctrl+Z | Undo |
| ⇧⌘+Z | ⇧Ctrl+Z | Redo |
| ⌘+G | Ctrl+G | Physics play/pause |
| ⇧⌘+G | ⇧Ctrl+G | Physics reset |
| ⇧⌘+I | ⇧Ctrl+I | Show/Hide Grid |
| ⌘+E | Ctrl+E | Show/Hide Ergonomic Figure |
| ⌘+F | Ctrl+F | Show/Hide Floor |
| ⌘+M | Ctrl+M | "Make it" - Go to pattern view |
| ⌘+B | Ctrl+B | "Design it" - Go to design view |
